Chevy Silverado – Complete Brake Job
Chevy Silverado is one of the top ranks with regards to practicality and livability. Although it’s competitor is more inventive in its interior designed and feature, the Chevrolet Silverado continue to amaze and impress reviewers because they still offer exceptional engine choices and features galore.
While the Silverado hangs on as a class leader, driver of this full size pick-up truck needs to know the complete brake job, since this type of truck are usually used on heavy duty tasks such as a need to move stuff. It is designed that way and it is a great choice for hauling things.
Below are some important tips of Complete Brake Job:
Replace Brake Pads
- Brake Inspection – Good brakes are vital for safe driving.
- Feel the Pedal – The pedal needs to be firm.
- Apply the Parking Brake – The pedal must work smoothly. Failure to release fully means the linkage or cables need attention.
- Check the Fluid Levels and its Appearance – A low level may be a sign of a leak or worn linings. Discoloration indicates moisture contamination and the need for a change of fluid.
- Remove a Front Wheel and Measure the Thickness of the Brake Pads – If worn down to minimum specifications or if wear indicators are making contact with the rotor, new linings are needed.
Rotor Checks
- Note the Condition of the Calipers and Caliper Mounts
- Pull a drum and inspect the drum surface, brake shoes, hardware and wheel cylinder
- Check everywhere for Leaks
Minimizing Break Noise
Possible Causes of Noise:
- Loose or worn pads
- Glazed pads
- Loose or worn calipers
- Missing anti-rattle springs
- Rotor finish too rough
- Hard spots
Brake Rotor Resurfacing
- Regardless of the type of rotor resurfacing equipment used, always remove the least amount of metal necessary to restore the rotor surface.
Replacing Brake Hardware
- Be sure to lubricate the shoe support pads on the drum backing plates with brake oil (never ordinary chassis grease). Also, lubricate the parking brake mechanism.
Bleed the Breaks
- This is essential for this reasons:
- To remove air bubbles that may have entered the system while repairs were being made because of a leak or a brake fluid level that got too low.
- To remove moisture contamination.
Finishing the Brake Job
- Do a short test drive at slow speed to confirm the brakes are working properly. The pedal should feel firm, the brakes should apply without pulling or grabbing, and you should hear no noise.
If you can do this by yourself, much better but if you prefer to pay for a service. You may visit Auto Repair Shop. There are lots of repair shops located in different States. Like Chicago, San Francisco, or pay a visit in Dallas auto repair shop.
